If you are a contractor needing fast backflow certification, then you have come to the right place.
We specialize in rapid response backflow preventer testing in Parker County – Weatherford, Springtown and nearby areas. All Repairs – Installations – Inspections and certification. In most cases same bay or next day service is available in Weatherford, Springtown, Aledo, Peaster, Millsap, Dennis, Azle and Whitt.
Our technicians are very professional, and you are welcome to witness any test. The technicians use top grade test equipment which is calibrated yearly for accurate results. We hold a local inventory of common repair parts, so any repairs can be completed quickly.
Device Test Results – after completing our tests we leave a copy of the results on the device for new installations as well as sending it to the city. Accuracy Backflow is very familiar with the process needed for each city and is registered with the City of Weatherford and Springtown.
https://cityofspringtown.com/city-services/public-works/
In Springtown, Texas, backflow testing is required annually for many properties, particularly those with irrigation systems, septic systems, or in ground pools. Additionally, any commercial property with a cross-connection, which is a physical connection between the public water system and another water source may also require annual testing.
Weatherford Cross connection testing
The City of Weatherford has partnered with Vepo, LLC to allow for the online submission of Backflow Prevention Assembly Test and Maintenance Reports. All testing information are entered directly by the tester into the online password protected system provided by Vepo, LLC. Weatherford being the county seat of Parker County ( 25–30 miles west of Fort Worth) has more established requirements. All backflow protection assemblies must be tested upon installation, repair or relocation. Because backflow prevention assemblies are mechanical devices that can degrade over time, these assemblies should be tested annually to ensure they are in working order.
https://weatherfordtx.gov/3116/Cross-Connection-ControlBackflow
Backflow Prevention Questions
Pursuant to Title 30, Texas Administrative Code, Section 290.44, it is the responsibility of the cities to protect its drinking water supply by instituting and enforcing a cross connection program. The program includes the installation of backflow prevention assemblies where deemed appropriate or necessary.
It is a logical assumption that because water is always under pressures it can only flow in one direction. However, it is possible for the flow to be reversed. Water will always flow towards the point of lowest pressure. If a main line in our system should break, or if a fire occurred and the fire department opened several hydrants, the pressure in our water mains could drop dramatically, causing a reversal of flow. The potential for this reversal of flow is why our department is concerned about the possibility of backflow of contaminants into our water system. Some cross connections are necessary and cannot he eliminated. Therefore, appropriate isolation methods and assemblies must be employed to protect against the potential of a backflow incident.
Why use a certified backflow tester?
All certified testers must be registered. A certified backflow tester will have taken the training and met the requirements of the Texas Natural Resource Conservation Commission guidelines which are defined by the Texas Administrative Code.
Need an Annual Backflow Test Or A New Installation Test Certificate?
Call Accuracy Backflow testing today. If you have been cited, or want to be pro-active, we can quickly see that your commercial property is compliant to insure that your water supply is not turned off by the utility.
Call or email us to schedule testing or repairs.
Covering the following Parker County Tx Zip codes:
76008 ,76020, 76066, 76082, 76085, 76086, 76087, 76088, 76098, 76439, 76485, 76490.